印尼BAYAH电厂一次风机故障原因分析与处理

本文针对印尼BAYAH电厂一次风机设备故障，详细的分析了故障产生的原因，介绍了三点法找转子动平衡和工装车削式在线修复电机滑环工法，阐述了两种工法的原理以及实施步骤。     

Stagnation flow of hybrid nanoparticles with MHD and slip effects

The flow of hybrid nanoparticles with significant physical parameters with different base fluids in the presence of Biot number, velocity slip, and MHD effects has not been explored so far, particularly for a circular cylinder. Therefore, the current report is presented to offer a numerical solution for hybrid nanoparticles with base fluids (water and ethylene glycerol) via a circular cylinder. The physical situation is interpreted in terms of partial differential equations and is converted into ordinary differential equations after applying the similarity transformation. The results are presented in both tabular and graphical forms. The impact of physical parameters on velocity distribution is examined through graphs. The comparative results of hybrid nanoparticles for distinct base fluids as ethylene glycol and water are proposed and the hybrid nanoparticles with base fluid water seems to be greater than that of the hybrid nanoparticles with base fluid EG. The temperature profile of hybrid nanoparticles is found to be a decreasing function with growth in velocity slip parameter but an opposite trend is noted in case of nanoparticles . The skin friction and Nusselt number augmented for the increase in magnetic field, velocity slip, and nanoparticle while it shows a decreasing trend toward thermal slip parameter. For the both cases, improvement in Biot number helps enhance the heat transfer constantly.     

创新式三工位钢丝圈包布机的研究与设计

截止目前,在市面上常见的对轮胎用钢丝圈进行包布缠绕的设备一般都是采用一台包布机对应一个钢丝圈进行包布缠绕,当需要同时进行多个钢丝圈缠绕时则需要多台包布机,且由于单个包布机之间需要保留一定的安全距离,使得整体所需的工厂占地面积较大;此外,通常情况下是一个操作员操作一台包布机,如果需要多台包布机同时工作则需要多个操作员进行操作,这样会导致生产人力成本上升,且人工操作生产效率较低。     

Design and analysis of a new wave energy converter based on a point absorber and a hydraulic system harvesting energy from waves near the shore in calm seas

The aim of this paper is to illustrate the design of a new wave energy converter, composed of a point absorber and a hydraulic system (power take off) and sized for recovering energy in calm seas from waves near the shore. The point absorber is consisting of a rectangular shaped buoy integrating a piston pump. The set buoy‐pump oscillates under the waves action and moves natural water in a closed circuit hydraulic system (power take off) composed of a piping connecting the piston pump itself, a pressurized reservoir, a hydraulic turbine and a discharge tank. The methodology adopted for designing the main constituents involves a 1D mathematical model, settled for understanding the motion of the buoy under the hypothesis of regular waves and fully developed sea, and a sizing procedure applied for the design of all the components of the hydraulic system. The project related to the Calabrian site of Cetraro (Mediterranean Sea—south Italy) led to designing a system with a 4 m large buoy, associated with a small 13 cm diameter micro Pelton turbine, so that more than 22 000 kWh could be recovered in a year.     

Advances in analysis of total uncertainties in a semi‐invasive residual stress measurement method

The ability to characterise residual stress distribution accurately and over different length scales, particularly deep into an engineering part, plays a significant role in assessing structural integrity. Two most commonly used techniques to measure residual stress fields deep into engineering components include neutron diffraction (ND) and deep‐hole drilling (DHD). As the measurements depend on several physical quantities, they are susceptible to error. The error or uncertainties may turn substantial and compromise the suitability of the results. Although noninvasive, the neutron diffraction technique is neither readily available nor portable and is limited to approximately 60‐mm‐thick specimen; errors associated with results become unacceptable at greater flight paths. Moreover, a mock‐up representing the engineering component is normally used in the ND technique. In contrast, the DHD technique is portable and measures residual stresses with high spatial resolution. An error propagation technique was applied to develop an error analysis procedure taking into consideration various stages of the DHD method and successfully applied to different DHD measurements. An essential feature comprising the effect of plasticity due to the creation of reference hole in the DHD procedure has not yet been taken into account in the error analysis procedure. This paper briefly describes how the uncertainties due to the creation of the initial reference hole can be determined. The effect of plasticity in the drilling procedure is quantified in this study. This error is combined with other sources of error and formulated to determine the total error. An incremental DHD technique was used to measure the complex triaxial residual stress field in an as‐welded circular disc, and the measured data were used to illustrate the total error using the error analysis method developed in the study.     

Electrocatalytic hydrogen evolution of highly dispersed Pt/NC nanoparticles derived from porphyrin MOFs under acidic and alkaline medium

Platinum (Pt)-based electrocatalysts often exhibit an excellent electrocatalytic activity for hydrogen evolution due to their best hydrogen bonding energy, but materials with high Pt content can easily cause aggregation and reduce their efficiency. In this article, Pt-based electrocatalysts with uniform dispersion and high efficiency were fabricated by a successive hydrothermal and calcination method, and the uniformly distributed Pt nanoparticle was mainly due to the anchoring effect of porphyrin ring in porphyrin MOFs, which made the minimized agglomerations as much as possible in the process of high temperature calcination. The results showed that the optimal Pt/NC-850 could reach current density of 10, 50 and 100 mA cm^?2 with only 17, 82 and 152 mV overpotentials, while the Pt/NC-850 also exhibited a superior stability and durability under acidic medium. Impressively, the Pt/NC-850 also had an excellent activity, good stability and durability under alkaline medium.     

对采煤机摇臂调高抖动问题的研究

分析了采煤机调高系统产生抖动的原因,并提出了可靠的解决方法,实用效果良好。     

DYL型输送带自控液压拉紧装置在寺河矿的应用

介绍了DYL型输送带自控液压拉紧装置在寺河矿的应用 ,叙述其工作原理及安装试运转时应注意的事项 ,并对液压系统工作压力的调定过程及系统使用中应注意的问题进行了分析 ,为其他用户的使用提供一定的参考     

采煤机液压锁的结构性能分析

对采煤机液压锁的结构、原理和性能参数进行分析和计算。